Dell PowerConnect 5324 - DSCP Value to Queue CLI Commands

350 Configuring Quality of Service
www.dell.com | support.dell.com
Assigning DSCP Values Using the CLI Commands
The following table summarizes the equivalent CLI commands for configuring fields in the DSCP
Mapping
page.
The following is an example of the CLI commands:
Table 9-98. DSCP Value to Queue CLI Commands
CLI Command Description
qos map dscp-queue dscp-
list to queue-id
Modifies the DSCP to queue mapping.
Console (config)# qos map dscp-queue 33 40 41 to 1