Dell PowerConnect 5324 User Manual

272 Configuring Device Information
www.dell.com | support.dell.com
GVRP VLAN Registration is enabled on the port, and the device is updated.
Configuring GVRP Using CLI Commands
The following table summarizes the equivalent CLI commands for configuring GVRP as displayed
in the
GVRP Global Parameters page.
The following is an example of the CLI commands:
Table 7-71. GVRP Global Parameters CLI Commands
CLI Command Description
gvrp enable (global) Enables GVRP globally.
gvrp enable (interface) Enables GVRP on an interface.
gvrp vlan-creation-forbid Enables or disables dynamic VLAN
creation.
gvrp registration-forbid De-registers all dynamic VLANs, and
prevents dynamic VLAN registration on
the port.
show gvrp configuration [ethernet
interface| port-channel port-channel-
number]
Displays GVRP configuration information,
including timer values, whether GVRP and
dynamic VLAN creation is enabled, and
which ports are running GVRP.
show gvrp error-statistics [ethernet
interface| port-channel port-channel-
number]
Displays GVRP error statistics.
show gvrp statistics [ethernet
interface| port-channel port-channel-
number]
Displays GVRP statistics.
clear gvrp statistics [ethernet
interface| port-channel port-channel-
number]
Clears all the GVRP statistics information.

Dell PowerConnect 5324 Specifications

General

Switching Capacity	48 Gbps
VLAN Support	Yes
Rack Mountable	Yes
Device Type	Switch
MAC Address Table Size	8K entries
RAM	64 MB
Flash Memory	8 MB
Power Device	Internal power supply
Voltage Required	AC 120/230 V (50/60 Hz)
Jumbo Frame Support	Yes
Ports	24 x 10/100/1000 + 2 x SFP
Management	Web-based, SNMP, CLI
Enclosure Type	Rack-mountable
Routing Protocol	Static IP routing
Remote Management Protocol	SNMP 1, 2, 3
Features	Flow control, auto-negotiation, port mirroring, Quality of Service (QoS)
Compliant Standards	IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3x
Operating Temperature	0 °C to 45 °C
Storage Temperature	-20 °C to 70 °C
Humidity	5% to 95% (non-condensing)
Layer	Layer 2