140 Configuring System Information
www.dell.com | support.dell.com
Cable Fault Distance
— The distance from the port where the cable error occurred.
Last Update
— The last time the port was tested.
Approximate Cable Length
— The approximate cable length. This test can only be performed
when the port is up and operating at 1 Gbps.
Performing a Cable Test
1
Ensure that both ends of the copper cable are connected to a device.
2
Open the
Integrated Cable Test for Copper Cables
page.
3
Click
Test Now
.
The copper cable test is performed, and the results are displayed on the
Integrated Cable Test
for Copper Cables
page.
Displaying Virtual Cable Test Results Table
1
Open the
Integrated Cable Test for Copper Cables
page.
2
Click
Show All
.
The
Virtual Cable Test Results Table
opens.
To Next Page
Loading...
