Dell PowerConnect 5324 User Manual

146 Configuring System Information
www.dell.com | support.dell.com
Access Profile — User-defined Access Profile lists. The Access Profile list contains a default value
of
Console List , to which user-defined access profiles are added. Selecting Console Only as the
Access Profile name disconnects the session, and enables accessing the device from the console
only.
Current Active Access Profile — The access profile that is currently active.
Set Access Profile Active — Activates an access profile.
Remove — Removes an access profile from the Access Profile Name list, when selected.
Activating a Profile
1 Open the Access Profiles page.
2 Select an Access Profile in the Access Profile field.
3 Select the Set Access Profile Active check box.
4 Click Apply Changes .
The Access Profile is activated.
Adding an Access Profile
Rules act as filters for determining rule priority, the device management method, interface type,
source IP address and network mask, and the device management access action. Users can be
blocked or permitted management access. Rule priority sets the order of rule application in a
profile.
Defining Rules for an Access Profile:
1 Open the Access Profiles page .
2 Click Add an Access Profile.
The Add An Access Profile page opens:

Dell PowerConnect 5324 Specifications

General

Switching Capacity	48 Gbps
VLAN Support	Yes
Rack Mountable	Yes
Device Type	Switch
MAC Address Table Size	8K entries
RAM	64 MB
Flash Memory	8 MB
Power Device	Internal power supply
Voltage Required	AC 120/230 V (50/60 Hz)
Jumbo Frame Support	Yes
Ports	24 x 10/100/1000 + 2 x SFP
Management	Web-based, SNMP, CLI
Enclosure Type	Rack-mountable
Routing Protocol	Static IP routing
Remote Management Protocol	SNMP 1, 2, 3
Features	Flow control, auto-negotiation, port mirroring, Quality of Service (QoS)
Compliant Standards	IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3x
Operating Temperature	0 °C to 45 °C
Storage Temperature	-20 °C to 70 °C
Humidity	5% to 95% (non-condensing)
Layer	Layer 2