200 Configuring Device Information
www.dell.com | support.dell.com
Unauthorized
— Set the interface state to unauthorized (deny traffic).
Auto
— Authorize state is set by the authorization method.
Current Interface Control
— The currently configured port authorization state.
Periodic Reauthentication
— Reauthenticates the selected port periodically, when enabled. The
reauthentication period is defined in the
Reauthentication Period (300-4294967295)
field.
Reauthentication Period (300-4294967295)
— Indicate the time span in which the selected port is
reauthenticated. The field value is in seconds. The field default is 3600 seconds.
Reauthenticate Now
— Permits immediate port reauthentication, when selected.
Authentication Server Timeout (1-65535)
— Defines the amount of time that lapses before the
device resends a request to the authentication server. The field value is in seconds. The field
default is 30 seconds.
Resending EAP Identity Request (1-65535)
— Defines the amount of time that lapses before EAP
request are resent. The field default is 30 seconds.
Quiet Period (0-65535)
— The number of seconds that the device remains in the quiet state
following a failed authentication exchange. The possible field range is 0-65535. The field default is
60 seconds.
Supplicant Timeout (1-65535)
— The amount of time that lapses before EAP requests are resent
to the user. The field value is in seconds. The field default is 30 seconds.
Max EAP Requests (1-10)
— The total amount of EAP requests sent. If a response is not received
after the defined period, the authentication process is restarted. The field default is 2 retries.
Displaying the Port Based Authentication Table
1
Display the
Port Based Authentication
page.
2
Click
Show All
.
The
Port Based Authentication Table
opens:
To Next Page
Loading...
