Configuring Device Information 211
Trap
— Enables traps being sent when a packet is received on a locked port.
Trap Frequency (1-1000000)
— The amount of time (in seconds) between traps. This field only
applies to Locked ports. The default value is 10 seconds.
Defining a Locked Port
1
Open the
Port Security
page.
2
Select an interface type and number.
3
Define the fields.
4
Click
Apply Changes
.
The locked port is added to the
Port Security Table
, and the device is updated.
Displaying the Locked Port Table
1
Open the
Port Security
page.
2
Click
Show All.
The
Port Security Table
opens:
Locked Ports can also be defined from the
Locked Ports Table,
as well as the
Port Security
page.
To Next Page
Loading...
