218 Configuring Device Information
www.dell.com | support.dell.com
shutdown Disables interfaces that are part of the
currently set context.
set interface active {ethernet
interface | port-channel port-channel-
number}
Reactivates an interface that is
shutdown due to security reasons.
speed bps Configures the speed of a given
ethernet interface when not using auto
negotiation.
autobaud Sets the line for automatic baud rate
detection.
duplex {half | full} Configures the full/half duplex
operation of a given ethernet interface
when not using auto negotiation.
negotiation Enables auto negotiation operation for
the speed and duplex parameters of a
given interface.
back-pressure Enables Back Pressure on a given
interface.
flowcontrol {auto | on | off | rx | tx} Configures the Flow Control on a
given interface.
mdix {on | auto} Enables automatic crossover on a
given interface or Port-channel.
show interfaces configuration
[ethernet interface |port-channel
port-channel-number]
Displays the configuration for all
configured interfaces.
show interfaces status [ethernet
interface | port-channel port-
channel-number]
Displays the status for all configured
interfaces.
show interfaces description
[ethernet interface | port-channel
port-channel-number]
Displays the description for all
configured interfaces.
Table 7-53. Port Configuration CLI Commands
CLI Command Description
To Next Page
Loading...
