Dell PowerConnect 5324 User Manual

222 Configuring Device Information
www.dell.com | support.dell.com
Operational Status — Operational status of the LAG.
Admin Auto Negotiation — Enables or disables Auto Negotiation on the LAG. Auto-negotiation is
a protocol between two link partners that enables a LAG to advertise its transmission rate, duplex
mode and flow control (the flow control default is disabled) abilities to its partner.
Current Auto Negotiation — The currently configured Auto Negotiation setting.
Admin Speed — The speed at which the LAG is operating.
Current LAG Speed — The currently configured speed at which the LAG is operating.
Admin Back Pressure — Enables or disables Back Pressure mode on the LAG. Back Pressure mode
is effective on the ports operating in Half Duplex in the LAG.
Current Back Pressure — The currently configured Back Pressure setting.
Admin Flow Control — Enables/disables flow control, or enables the auto negotiation of flow
control on the LAG. Flow Control mode is effective on the ports operating in Full Duplex in the
LAG.
Current Flow Control — The user-designated flow control setting.
Defining LAG Parameters
1 Open the LAG Configuration page.
2 Select a LAG in the LAG field.
3 Define the fields.
4 Click Apply Changes .
The LAG parameters are saved to the device.
Modifying LAG Parameters
1 Open the LAG Configuration page.
2 Select a LAG in the LAG field.
3 Modify the fields.
4 Click Apply Changes .
The LAG parameters are saved to the device.
Displaying the LAG Configuration Table:
1 Open the LAG Configuration page.
2 Click Show All.
The LAG Configuration Table opens:

Dell PowerConnect 5324 Specifications

General

Switching Capacity	48 Gbps
VLAN Support	Yes
Rack Mountable	Yes
Device Type	Switch
MAC Address Table Size	8K entries
RAM	64 MB
Flash Memory	8 MB
Power Device	Internal power supply
Voltage Required	AC 120/230 V (50/60 Hz)
Jumbo Frame Support	Yes
Ports	24 x 10/100/1000 + 2 x SFP
Management	Web-based, SNMP, CLI
Enclosure Type	Rack-mountable
Routing Protocol	Static IP routing
Remote Management Protocol	SNMP 1, 2, 3
Features	Flow control, auto-negotiation, port mirroring, Quality of Service (QoS)
Compliant Standards	IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3x
Operating Temperature	0 °C to 45 °C
Storage Temperature	-20 °C to 70 °C
Humidity	5% to 95% (non-condensing)
Layer	Layer 2