236 Configuring Device Information
www.dell.com | support.dell.com
Querying and Sorting Dynamic Addresses Using CLI Commands
The following table summarizes the equivalent CLI commands for querying and sorting dynamic
addresses as displayed in the
Dynamic Address Table
.
The following is an example of the CLI commands:
Table 7-58. Query and Sort CLI Commands
CLI Command Description
bridge aging-time
seconds
Sets the address table aging time.
show bridge address-table
[vlan
vlan
] [ethernet
interface
| port-channel
port-channel-number
]
Displays classes of dynamically created
entries in the bridge-forwarding database.
Console (config)# bridge aging-time 250
Console (config)# exit
Console# show bridge address-table
Aging time is 250 sec
vlan mac address port type
---- ----------- ---- ----
1 00:60:70:4C:73:FF g8 dynamic
1 00:60:70:8C:73:FF g8 dynamic
200 00:10:0D:48:37:FF g8 static
To Next Page
Loading...
