Configuring Device Information 247
Defining STP Port Settings Using CLI Commands
The following table summarizes the equivalent CLI commands for defining STP port parameters
as displayed in the
STP Port Settings
page.
Table 7-61. STP Port Settings CLI Commands
CLI Command Description
spanning-tree disable Disables spanning tree on a specific
port.
spanning-tree cost cost Configures the spanning tree cost
contribution of a port.
spanning-tree port-priority priority Configures port priority.
spanning-tree portfast Enables PortFast mode.
show spanning-tree [ethernet interface
| port-channel port-channel-number]
Displays spanning tree configuration.