Viewing Statistics 307
Interface
— Specifies whether statistics are displayed for a port or LAG.
Refresh Rate
— Amount of time that passes before the interface statistics are refreshed.
Join Empty
— Device GVRP Join Empty statistics.
Empty
— Device GVRP Empty statistics.
Leave Empty
— Device GVRP Leave Empty statistics.
Join In
— Device GVRP Join In statistics.
Leave In
— Device GVRP Leave In statistics.
Leave All
— Device GVRP Leave all statistics.
Invalid Protocol ID
— Device GVRP Invalid Protocol ID statistics.
Invalid Attribute Type
— Device GVRP Invalid Attribute ID statistics.
Invalid Attribute Value
— Device GVRP Invalid Attribute Value statistics.
Invalid Attribute Length
— Device GVRP Invalid Attribute Length statistics.
Invalid Events
— Device GVRP Invalid Events statistics.
Displaying GVRP Statistics for a Port
1
Open the
GVRP Statistics
page.
2
Select an interface in the
Interface
field.
The interface’s GVRP statistics are displayed.
Resetting GVRP Statistics
1
Open the
GVRP Statistics
page.
2
Click
Reset All Counters
.
The GVRP counters are reset.
Viewing GVRP Statistics Using the CLI Commands
The following table summarizes the equivalent CLI commands for viewing GVRP statistics.
Table 8-82. GVRP Statistics CLI Commands
CLI Command Description
show gvrp statistics [ethernet
interface | port-channel port-
channel-number]
Displays GVRP statistics.
show gvrp error-statistics [ ethernet
interface | port-channel port-
channel-number]
Displays GVRP error statistics.
To Next Page
Loading...
