Starting and Configuring the Device 47
01-Jan-2000 01:01:36 %LINK-W-Down: g18
01-Jan-2000 01:01:36 %LINK-W-Down: g19
01-Jan-2000 01:01:36 %LINK-W-Down: g20
01-Jan-2000 01:01:36 %LINK-W-Down: g21
01-Jan-2000 01:01:36 %LINK-W-Down: g22
01-Jan-2000 01:01:36 %LINK-I-Up: Vlan 3000
01-Jan-2000 01:01:36 %LINK-I-Up: Vlan 1
01-Jan-2000 01:01:36 %LINK-I-Up: g1
01-Jan-2000 01:01:36 %LINK-I-Up: g13
01-Jan-2000 01:01:36 %LINK-I-Up: g14
01-Jan-2000 01:01:36 %LINK-I-Up: g19
01-Jan-2000 01:01:36 %LINK-I-Up: g20
01-Jan-2000 01:01:36 %LINK-I-Up: g21
01-Jan-2000 01:01:36 %LINK-W-Down: g23
01-Jan-2000 01:01:36 %LINK-W-Down: g24
01-Jan-2000 01:01:36 %LINK-W-Down: ch1
01-Jan-2000 01:01:36 %LINK-I-Up: Vlan 1000
01-Jan-2000 01:01:36 %TRUNK-I-PORTADDED: Port g24 added to ch1
01-Jan-2000 01:01:36 %LINK-I-Up: g22
01-Jan-2000 01:01:36 %LINK-I-Up: g23
01-Jan-2000 01:01:36 %LINK-I-Up: g24
01-Jan-2000 01:01:36 %LINK-I-Up: ch1
01-Jan-2000 01:01:36 %LINK-W-Down: g1
01-Jan-2000 01:03:42 %INIT-I-Startup: Cold Startup
console>
After the device boots successfully, a system prompt is displayed (
console>
) which is used to
configure the device. However, before configuring the device, ensure that the latest software
version is installed on the device. If it is not the latest version, download and install the latest
version. For more information on downloading the latest version, see the "Software Download" .
To Next Page
Loading...
