Configuring System Information 79
Defining System Time Settings
The
Time Synchronization
page contains fields for defining system time parameters for both the
local hardware clock, and the external SNTP clock. If the system time is kept using an external
SNTP clock, and the external SNTP clock fails, the system time reverts to the local hardware clock.
Daylight Savings Time can be enabled on the device. The following is a list of Daylight Time start
and end times in specific countries:
•
Albania
— Last weekend of March until the last weekend of October.
•
Australia
— From the end of October until the end of March.
•
Australia
- T
asmania
— From beginning of October the end of March.
•
Armenia
— Last weekend of March until the last weekend of October.
•
Austria
— Last weekend of March until the last weekend of October.
•
Bahamas
— From April to October, in conjunction with U.S. summer hours.
DELL Switch# show system
System Description:
Ethernet Routing Switch
System Up Time (days,hour:min:sec): 0,00:04:17
System Contact: spk
System Name: DELL Switch
System Location: R&D
System MAC Address: 00:10:b5:f4:00:01
Sys Object ID: 1.3.6.1.4.1.674.10895.3000
Type: PowerConnect 5324
Power Supply Status
------------- --------
Main OK
Redundant OK
FAN Status
------------- --------
1OK
2OK
DELL Switch#
To Next Page
Loading...
