Fiat Brava - Page 227

Electrical equipment
Contents
Bravo-Brava
55.
page
page
Danger to health
Effects of over-exposure
Safety regulations for handling air bag
modules
Disposing of used air bag modules
Wiring diagram
Removing driver's side air bag
Removing clock spring
Removing-refitting control unit
Refitting clock spring
Refitting Air Bag
Removing-refitting passenger side air
bag
Replacing passenger side air bag
trim
Removing-refitting air bag control
unit 1
ELECTRICALLY-OPERATED DOOR MIR-
RORS
- Removing-refitting door mirror
103
103
1.03
105
1Q6
107
108
110
110/2
110/6
110/7
110/9
10/10
111
- Component location
- Programming
- Programming additional remote control
units using simplified procedure
- Checking memory closure
- Programming codes with manual ac-
' cess
- Automatic activation of electronic alarm
- Part notes and specifications
- Fault diagnosis
- Layout diagram
- Alarm control unit input and output sig-
nals
- Wiring diagram
- Receiver connector
- Removing-refitting alarm control unit
PREHEATING CONTROL DEVICE
- Introduction
- Preheating electronic control unit
- Glow plug control.
- Main preheating system operational
faults
- Engine stop solenoid
135
136
141
144
145
149
149
149
151
152
153
154
154
155
155
157
157
158
RECHARGING
- Battery 112
- Alternator 112
- Alternator Marelli A1151-14V-38/65A 114
- Alternator Marelli A1151-14V-40/75A 118
- Alternator Marelli A1271-14V-50/85A 120
STARTING
Starter motor Marelli E80 - 0.9/12
Starter motor Marelli M70
R-1.4/12
Starter motor Marelli E95
RL-2.2/12
Checks
Starter motor operational fault diag-
nosis
125
130
132
133
133
COPYRIGHT Fiat Auto S.p.A.
Total or partial reproduction of the text or il
lustrations is forbidden.
The information in this publication is inten-
ded as a guide and could be superseded as a
result of modifications adopted by the Manu-
facturer at any time due to technical and
commercial reasons and in accordance with
local regulations.
ALARM
- Introduction 134
- Emergency key 134
- OPERATION 134/1
- Activation with siren by-pass 134/2
- Remote control unit battery flat
indication 134/2
- Distance between sending unit
and receiver during programming 134/2
Fiat Auto S.pA
D.M.C. , M.P.S.
Servizi Post Vendita - Tecnologie Assistenziali
Largo Senatore G. Agnelli, 5 - 10040 Volvera - TO (Italia)
Print no. 506.670/14 - Marzo 1998 - 750
Printed by Satiz S.p.A. - Turin (Italy)
n° ordinazione "604.45.832*
Publication no. 506.670/14