Electrical equipment
Radio equipment
Bravo-Brava
55.
Description of the controls
22 23 24
18 17 16 15
13 12 11 10
1.
Switch for programming station N.
1
/ selecting CD
N.
1
/ adjustment in decreasing order of clock hours
/ entering of 1st anti-theft device code figure
2.
Switch for programming station N. 2 / selecting CD
N. 2 / adjustment in decreasing order of clock hours
/ entering of 2nd anti-theft device code figure
3. Switch for programming station N. 3 / selecting CD
N. 3 / adjustment in decreasing order of clock
min-
utes / entering 3rd anti-theft device code figure
4.
Switch for programming station N. 4 / selecting CD
N. 4 / adjustment in increasing order of clock
min-
utes / entering 4th anti-theft device code figure
5. Switch for programming station N. 5 / selecting CD
N. 5 / selecting hour priority on display
6. Switch for programming station N. 6 / selecting CD
N. 6 / selecting radio, cassette, CD function priority
on display
7. Switch for automatic or manual tuning in decreas-
ing frequency order, rewinding cassette tape, se-
lecting previous CD track
8. Switch for selecting radio, cassette, CD operating
modes
9. Switch for automatic or manual tuning in increasing
frequency order, winding on cassette tape, select-
ing next CD track
10.
Switch for selecting the following functions: traffic
news (TP), CD track repetition, anti-theft mode
with security code
11.
Switch for selecting the following functions: medi-
um/long wave bands, manual search for transmit-
ter, CD track repetition
12.
Switch for selecting the following functions: FM
band,
manual search for transmitter, random CD
track repetition
14.
15.
13.
Switch for selecting the following functions: FM
band for RDS stations only (Radio Data System),
automatic programming of stations in RDS2 band
Display
Switch for changing display of radio frequency,
cassette player, CD, time (impluse only) and select-
ing time adjustment (prolonged pressing)
16.
Switch for selecting listening for 10 seconds to
each of the stations programmed, automatic search
for previous or next cassette track, listening for 10
seconds to various CD tracks
Dolby B function selection switch (elimination of
hissing)
Loudness selection switch
Switch for adjusting functions selected with switch
20 in decreasing order
Audio functions selection switch: volume,
low/high tones, right/left balance, front/rear and
pre-setting volume level for TP (traffic information)
Switch for adjusting functions selected with switch
20 in increasing order
Switch for automatically opening cassette housing
and ejecting the tape
Radio activating/deactivating switch
Reverse function selection switch
Pressure point for manually closing cassette hous-
ing flap
Switch for selecting the following functions: Mute,
radio on logic
17.
18.
19.
20.
21.
22.
23.
24.
25.
26.
50/2
Print no. 506.670/06
To Next Page
Loading...
