Electrical system
Fiat CODE
Bravo-Brava
55.
Key memorization procedure with USED Fiat CODE and electronic fuel injection control units
This procedure is necessary if further keys need to be memorized, or if the key set has to be reset because
the notches have been replaced. The procedure consists of memorizing up to a maximum of 8 and a
minimum of 3 different keys (MASTER key included).
To avoid errors in the key memorization procedure, the procedure described below should be
read carefully before being carried out on the car.
Adding a new key necessarily in-
volves rememorizing all the existing
keys, as the keys not used during
this procedure are deleted from
memory.
Insert the MASTER key in the ignition switch
at the ignition off (STOP) position.
Turn the MASTER key to the on position
(+15);
the CODE warning light should come
on for 0.7 s.
When the CODE warning light goes out, turn
the MASTER key to the off (STOP) position.
68
Publication no. 506.670/01
To Next Page
Loading...
