EasyManua.ls Logo

Fiat Brava - Identification of Connector Terminals; Stalk Unit Right Lever

Fiat Brava
622 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Bravo-Brava
Electrical system
Various devices
55.
IDENTIFICATION OF CONNECTOR TERMINALS
Connector A
Connector B
Pin
no.
1
2
3
4
5
6
7
8
9
Wire
colour
HN
H
-
HG
S
SN
SG
N
-
Circuit involved
Windscreen wiper and brake
Windscreen wiper - High speed
Not connected
Windscreen wiper
Intermittent/Low speed
Bidirectional pump
Bidirectional pump
Headlamp washer control
Earth
Trailer indicators warning light
Connector C
Pin
no.
1
2
3
4
5
6
Wire
colour
-
HL
AG
AIM
LR
A
Circuit involved
Not used
Rear fog lamps enablement
Int/A
Right direction indicator
Hazard lights indicator
Right direction indicator
Pin
no.
1
2
3
4
5
6
7
Wire
colour
-
-
HR
LR
CB
AG
GV
Circuit involved
Northern Europe legislation
Northern Europe legislation
Dipped headlamps
Main beam headlamps
Int/A
Int
Side lights
Connector D
Pin
no.
1
2
3
4
5
6
7
Wire
colour
-
LB
LN
-
CN
CL
CB
Circuit involved
Not connected
+30
Horn
Not connected
Positive Windscreen
wash/wipe-rear window washer
Rear window wiper
Rear window wiper and brake STALK UNIT RIGHT LEVER
The stalk unit right lever controls the windscreen wiper (two speeds + intermittent operation) and the
windscreen washer pump in accordance with the following logic:
- When the right lever is moved downwards one click, the switch is activated, switching on the
wind-
screen wiper intermittent function at the rate of about 15 wipes a minute.
- When the switch is moved two clicks downwards, intermittent operation at about 35 wipes a minute
is selected.
Operation remains the same as above, except that the pause time between wipes is reduced to 2 sec-
onds.
- By moving the switch three clicks downwards, continuous operation of the windscreen wiper is swit-
ched on at 45 wipes a minute.
If from the STOP position the lever is pushed upwards and held in this position, continuous operation
of the windscreen wiper is still selected, but with the lever in an unstable position.
In other words, the windscreen operates for as long as the lever is held in that position, and stops as
soon as the lever is released.
Copyright Fiat Auto
39

Table of Contents

Related product manuals