Bravo-Brava
Electrical system
Fiat CODE
55.
MASTER key (maroon)
- exert light pressure and join the two half
casings of the NEW MASTER key;
- after carrying out the above-mentioned
operation,
carry out the procedure for
memorizing the new set of keys.
If the ignition switch block has been dam-
aged a long distance away from the place
where the MASTER key is
stored,
the follow-
ing emergency procedure must be carried
out:
- replace the damaged switch block;
- insert the new MASTER key (1) without
the Transponder in the ignition switch
block;
- bring the old key (2) with Transponder in
contact with the new MASTER key (1)
without Transponder inserted in the
igni-
tion switch block.
- Turn the key, keeping the handles in
con-
tact for starting.
The Transponder contained in the OLD
MASTER key must be transferred to the seat-
ing in the handle of the NEW MASTER key as
soon as possible.
M
If
the
MASTER key is unavailable, it will be impossible to memorize new
keys
which permit en-
*MJ^
gine starting.
If the MASTER key is lost or its Transponder is broken/lost, the following must be replaced:
- notches kit and new keys (including the CODE CARD);
- Fiat CODE control
unit;
- electronic fuel injection control
unit.
This
replacement of components is carried out at the first service intervention where the MAS-
TER
key has to be used (for example breakage of the ignition switch block).
Transponder
S
Under no circumstances may the key
Transponders
be handled, replaced
or
exchanged (except
in
cases
of replacing the notches kit and new
keys,
and only the MASTER key).
Addition of a new key to the keys supplied with the car
Adding
a
new key involves the rememorization of all the existing keys supplied with the car, as
keys not used during this procedure are deleted from memory.
Copyright Fiat Auto
77
To Next Page
Loading...
