Bodywork
Replacing body panels
Bravo-Brava
70.
Finishing operations
1.
Correct any distortions to the panel using a hammer and dolly block.
2.
Remove any weld slag using a disc grinder.
Protections
1.
Apply the electro-phoretic treatment to the areas previously involved in the welding.
2.
Seal the joins between the underdoor side member and the bodyshell, using IVI 854210 transparent
acrylic sealant or an equivalent product.
3. Proceed with the painting and waxing stage.
4.
Apply wax based oil protective inside the underdoor side member.
. .
P4A088M02
88
Print no. 506.670/01
To Next Page
Loading...
