Bodywork
Replacing body panels
Bravo-Brava
70.
Finishing operations
1.
Correct any distortions to the panel using a hammer and dolly block.
2.
Remove any weld slag using a disc grinder.
3. Renew the sealant on the rib removed previously, then refit it on the bodyshell making sure that it ad-
heres perfectly to the roof.
P4A092M01
Protections
1.
Apply the electro-phoretic treatment to the areas previously involved in the welding.
2.
Seal the joins between the roof and the bodyshell using IVI 854210 transparent acrylic sealant or an
equivalent product.
3. Proceed with the painting and waxing stage.
92
Print no. 506.670/01
To Next Page
Loading...
