Bodywork
Replacing body panels
70.
Finishing operations
1.
Correct any distortions to the panel using a hammer and dolly block.
2.
Remove any weld slag using a disc grinder.
P4A096M01
Protections
1.
Apply the electro-phoretic treatment to the areas previously involved in the welding.
2.
Seal the joins between the rear cross member cover and the bodyshell using IVI 854210 transparent
acrylic sealant or an equivalent product.
3. Proceed with the painting and waxing stage.
96 Print
no.
506.670/01
Brava
To Next Page
Loading...
