Bodywork Bravo-Brava
Replacing structural body panels
70.
Finishing operations
1.
Correct any distortions to the panel using a hammer and dolly block.
2.
Remove any weld slag using a disc grinder.
Protections
1.
Apply the electro-phoretic protective treatment to the areas previously involved in the welding.
2.
Seal the joins between the front pillar and the bodyshell, using IVI 854210 transparent acrylic sealant
or an equivalent product.
3. Proceed with the painting and waxing stage.
4.
Apply wax based oil protective to the inside of the front pillar.
120
Print
no.
506.670/01
To Next Page
Loading...
