2D Mode
Operation
:
1. Select Quad display mode.
2. Freeze the image.
3. Select the next display position by using the format key.
4. Freeze the next image.
If the image is frozen and you use [Update 2D] (the right trackball key) the next image is selected and
active.
If the image is active (in real time mode) by pressing the [Update 2D] ( the right track ball key) the
next image is selected and active.
Press the [Single] key to return to the Single display mode.
Voluson
®
730Pro - Basic User Manual
5-14 105831 Rev. 0
To Next Page
Loading...
