Spectral Doppler Mode
7.1.3 PW Sub Menu
The PW Main menu must to be active.
Select the [Sub Menu] item.
The functions of the PW Submenu are shown in the menu area
as well as in the status area.
Note: Changes are only possible in write mode!
However, changes of the angle and the baseline are also possible in read mode.
The following functions are available: Scale
(chapter 7.1.3.1)
Format
(chapter 7.1.3.2)
Frequency
(chapter 7.1.3.3)
Dynamic
(chapter 7.1.3.4)
7.1.3.1 Scale
At the upper and lower screen edges the maximum values (in relation to the zero line) and the selected
measuring unit are displayed.
e.g.: 97 cm/s (max. displayable velocity) 20/DIV (space between 2 points 20 cm/s)
kHz: Doppler shift frequency
cm/s: flow velocity
m/s: flow velocity
Voluson
®
730Pro - Basic User Manual
105831 Rev. 0 7-11
To Next Page
Loading...
