GE Voluson 730Pro - CFM Operation

CFM Mode
The “CFM Main” menu appears on the screen (write mode).
Remarks:
* Changing the Quality, Frequency, Wall Motion Filter, PRF, Gain, Invert and 2D+2D/C is only
possible in write mode.
* Beam steering is only possible with linear probe and in write mode.
8.2 CFM Operation
The CFM operation consists of : CFM Box Position and CFM Box Size (chapter 8.2.1)
CFM Gain Control
(chapter 8.2.2)
Quality
(chapter 8.2.3)
WMF
(chapter 8.2.4)
Velocity Range (PRF)
(chapter 8.2.5)
Frequency
(chapter 8.2.6)
Invert
(chapter 8.2.7)
2D + 2D/C
(chapter 8.2.8)
Threshold
(chapter 8.2.9)
Voluson
®
730Pro - Basic User Manual
105831 Rev. 0 8-3