GE Voluson 730Pro - TD Main Menu

TD Mode
10. TD Mode (Tissue Doppler Mode)
Tissue-Doppler imaging generates a Color image by using the Doppler principle.
This Color image is overlaid onto the 2D image.
The Tissue image provides information about tissue motion direction and velocity.
The Tissue-Doppler captures low flow but high amplitude signals associated with wall motion and
creates a color-coded tissue image.
The TD mode is subdivided in two groups. In these groups you will see how to use TD mode and
how to adjust the TD settings.
To use the TD mode review: TD Main Menu
(chapter 10.1)
To adjust TD settings review: TD Sub Menu
(chapter 10.3)
To use special utilities review: Utilities
(chapter 12) and Gray Chroma Map (chapter 12.1)
10.1 TD Main Menu
TD
Mode key (hard key)
By pressing the [TD] key the TD mode is switched on.
The TD Box appears in the active 2D image.
To use the TD mode, review: TD Operation
(chapter 10.2)
To adjust the TD settings, review: TD Sub Menu
(chapter 10.3)
Remarks:
* The Tissue-Doppler mode is an option. If the option is not installed, the [TD] key has no function.
* The [TD] key is only illuminated if the selected probe is capable of the Tissue Mode.
Voluson
®
730Pro - Basic User Manual
10-2 105831 Rev. 0