System Setup
17.3.2 User Settings
This tool saves the current settings of the system under a program button.
Steering Angle:
If the selected probe supports steering the current and the possible angles are displayed.
If the selected probe does not support steering, the input field remains gray (disabled).
Document Start position:
This set-up tool defines the start position of the write cursor when switching the [ABC] function on.
The write cursor in the graphic display shows the current set-up position.
To change the current document start position: Choose a new position with the mouse cursor and press
[Set] (right/left trackball key).
Doppler 2D Refresh:
Activates the frozen 2D image in Doppler Mode during movement of the trackball.
Voluson
®
730Pro - Basic User Manual
105831 Rev. 0 17-7
To Next Page
Loading...
