GE Voluson 730Pro - To View Previous Reports; To Transfer a Patient Report; To Print a Patient Report

Calculations and Patient Reports
14.2.4 To view previous Reports
For different exams of the same patient, all previous reports can be viewed by
using the same ID.
Select this button to view all existing Patient Reports.
1. Select the desired Date.
2. Select the desired Application by clicking inside the
“white circle”.
3. Click the [View] button to show the selected
Patient Report page on the screen.
14.2.5 To transfer a Patient Report
Click this button on the report screen to transfer the patient report to the selected
IP-address.
Note:
DICOM address must be pre-defined.
To specify the DICOM address review System Setup: DICOM
(chapter 17.3.8)
Note:
Receiving Report Data
An example for software that can receive and store reports from 3D View 2000 is the “PIA”
documentation system for medical diagnostics and digital image archiving from “ViewPoint”.
(www.viewpoint-online.com)
NOTE:
To transfer a Cardiac and a Vascular Report is not possible with this software version!
14.2.6 To print a Patient Report
Click this button on the report screen to print the patient report.
Voluson
®
730Pro - Basic User Manual
14-8 105831 Rev. 0