2D Mode
5.16.2 2D Auto Cine
With the “2D Auto Cine” function the user can review a defined sequence (start, end) of Single-,
Dual- and Quad format 2D- and 2D/Color images. Review speed and read-zoom are available.
1. Store a 2D image or a CFM image.
Note:
In dual- and quad formats select the desired image using the [Format] keys.
2. Press the left trackball key [Auto Cine].
The 2D Auto Cine menu appears on the screen.
4. Rotate this digipot to select the starting image of the cine sequence.
Pressing the digipot toggles the cine image step size to 1 or 5 increment steps.
The selected ultrasound image is simultaneously displayed on the screen.
5. Rotate this digipot to select the final image of the cine sequence.
Pressing the digipot toggles the cine image step size to 1 or 5 increment steps.
The image is displayed on the screen.
6. Select the review speed. 100% corresponds to the recorded speed (real time).
7. Select the read-zoom by rotating this digipot. (factor 0.8 to 2.4)
By pressing on the digipot the factor 1.0 is set automatically.
8. Select the Cineloop mode review direction.
Images are displayed from Start to End and back.
Images are only displayed from Start to End.
Voluson
®
730Pro - Basic User Manual
5-16 105831 Rev. 0
To Next Page
Loading...
