GE Voluson 730Pro - PD Sub Menu

PD Mode
9.3 PD Sub Menu
The “PD Main” menu has to be active.
Select the [Sub Menu] item.
The functions of the PD Submenu are shown in the menu area
as well as in the status area.
Note: Changes are only possible in write mode.
Only changes in the PD Map are possible in read mode.
Following functions are available: Line Filter
(chapter 9.3.1)
Gently Color
(chapter 9.3.2)
Artifact Suppression (chapter 9.3.3)
Ensemble
(chapter 9.3.4)
Line Density
(chapter 9.3.5)
PD-Map
(chapter 9.3.6)
Balance
(chapter 9.3.7)
Dynamic Set
(chapter 9.3.8)
Smoothing
(chapter 9.3.9)
Voluson® 730Pro - Basic User Manual
9-8 105831 Rev. 0