Connections
21.2.8 S-VHS Videorecorder Connection Scheme
(Sony SVO-9500MDP)
Set DIP Switches on RS 232C interface board as shown:
Switch 1: OFF-Audio is muted during fast playback
Switch 2: OFF-FF/REW mode is used during searches.
Switch 3: ON-VCR counter is reset upon cassette ejection.
Switch 4: OFF-The VCR can be controlled by the V730.
Switch 5 + 6: ON-The Baud rate is set to 19200 bit/sec
(must be the same as V730)
*CAUTION: The outlets ST1 – ST5 may be set to 230V or 115V
Modification of voltage setting only by an authorized service person!
**REMARKS:
Use only: S-VHS cable: KUV1 PNO. 193822
Remote cable: KUG5 PNO. 195606
Voluson
®
730Pro - Basic User Manual
21-12 105831 Rev. 0
To Next Page
Loading...
