2D Mode
9. Start/Stop the 2D Auto Cine function with the right or left trackball key.
At dual- and quad formats only the Cine sequence of the active 2D image
(indicated with the green dot) is displayed.
Remarks:
* The 2D Auto Cine function is only possible in read mode.
* The 2D Auto Cine function is also possible at multiple format.
Therefore select the desired image prior to activating [Auto Cine].
To change to the next frozen 2D image press the [Exit] key, choose
the image, activate [Auto Cine] and then [Start] to play back the cine
memory of the active 2D image (indicated with the green dot).
* If the 2D Auto Cine function is stopped, move the trackball horizontally to display the
2D images of the stored sequence one by one.
* Press the [Exit] key on the control panel to return to the 2D Main mode menu.
5.17 Pan Zoom
The image can be magnified in read- and write mode with the Pan Zoom function.
Use the [Zoom] control to adjust the zoom factor.
Nine positions are possible: from factor 0.8 to factor 2.4
By pressing on the control automatically the factor 1.0 is set.
Remark:
* The Pan Zoom function is possible in read- and write mode.
Voluson
®
730Pro - Basic User Manual
105831 Rev. 0 5-17
To Next Page
Loading...
