GE Voluson 730Pro - DICOM Configuration

Printing / Recording / Saving / Sending
16.3.7.1 DICOM Configuration
1. Select the [Configuration] item.
The following window appears on the screen.
2. Highlight the line with the desired DICOM Address.
Note:
Only lines with the name “STORE” and only one address can be selected!
To add a new destination, click the [Add] button and enter the information.
To edit the configuration of an existing DICOM Address, click the [Edit] button.
For further details review System Setup: To specify a DICOM Address
(chapter 17.3.8.1)
Select this item to display the “DICOM Transfer Queue Status”.
The following window shows the current transfer status.
Voluson
®
730Pro - Basic User Manual
105831 Rev. 0 16-15