EasyManua.ls Logo

GE Voluson 730Pro - VCR Recording

GE Voluson 730Pro
480 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Printing / Recording / Saving / Sending
16.2 VCR Recording
The VCR comes already installed within the system.
review: S-VHS Videorecorder Connection Scheme
(chapter 21.2.8)
By pressing the [VCR] key on the control panel the menu area as well as the status area
changes to the “VCR Remote control” menu.
The availability of the digipot-push buttons depends on the status of
the VCR.
Toggle function: Record on / off
Pressing twice starts recording.
Pressing twice again stops recording.
[Exit] changes automatically to the internal Video.
Remarks:
* By selecting [Play] the system switches automatically to the external video source.
* Always, due to quality the S-VHS source should be used. review Peripherals
(chapter 17.3.3)
* The [Microphone] key on the control panel is only available if no Doppler signal is active.
It should only be activated during [Record].
* During VCR recording all other operating functions of the V730Pro are impossible.
Note:
The DIP-Switch (4) on the Video recorder changes between local and remote control.
Voluson
®
730Pro - Basic User Manual
105831 Rev. 0 16-5

Table of Contents

Other manuals for GE Voluson 730Pro

Related product manuals