Description of the System
3.2.2 Mechanical Adjustment
The control console can be rotated 30° to the right.
TRANSPORT LOCK
There is a lever for locking and unlocking the control console, mounted at the front below the control
console. When preparing the system for transport, the lock shall be engaged in order to secure the
console against uncontrolled rotation. The bolt set to the locking position, the lock catches in when the
console is rotated to its center 0° position.
ROTATION OF THE CONTROL CONSOLE
When rotating the control console grasp it only at the front grip.
1. Pull the lever under the control console forward.
2. Rotate the console to desired position.
WARNING: Do not put your hand between the control console and the Main Unit when
moving it to the 0 position: Danger of injuries!
Voluson
®
730Pro - Basic User Manual
105831 Rev. 0 3-5
To Next Page
Loading...
