Printing / Recording / Saving / Sending
16.3.2 Saving 2D Cine
Operation:
1. Press this key to save the scanned 2D Cine sequence.
The menu area displays the “Save 2D” menu.
2. Select the [2D Cine] item.
3. Adjust the start and end image of the
2Dsequence (cine loop) by rotating
these two controls.
4. Select the desired “Save/Send” destination among:
Saving to Sonoview
Sending to an external DICOM server.
Saving to Sonoview as well as sending to an external DICOM server.
5. Press the right or left trackball key to save the scanned 2D Cine Sequence.
During the save process the message “Saving in progress” will be displayed on the
screen!
Save with Comment
review: (chapter 16.3.6)
For restoring of saved images review: Sonoview
(chapter 15)
Voluson
®
730Pro - Basic User Manual
16-8 105831 Rev. 0
To Next Page
Loading...
