System Setup
17.3.1 General
Date Format:
Activate the corresponding option button (only one can be active) to select the order of the date format
desired (day-DD, month-MM and year-YY).
Display:
(each button is an on/off switch)
Activate the desired option buttons.
TGC curve:
TGC-graphic display on/off.
Screen saver:
on: 5 min after last operation the screen saver starts.
off: Press any hard key.
Auto scan stop:
2 min after the last operation the system activates the Read-Mode, if not yet active.
Beeper off:
switch off the “Beep” sound which is audible when pressing system hard keys
Clinic Name:
Select the text box to enter a new clinic name and use the keyboard to enter information. The clinic
name will be copied into the Hospital ID in the information header of the screen, after closing the
setup with [Save&Exit].
Language:
Open pop up menu and select the language desired.
Note:
After changing a language the system must be rebooted.
After [Save&Exit] the system will prompt with a dialog box to reboot the system.
Voluson
®
730Pro - Basic User Manual
105831 Rev. 0 17-5
To Next Page
Loading...
