GE Voluson 730Pro - CFM Sub Menu

CFM Mode
8.3 CFM Sub Menu
“Main CFM” menu has to be active.
Select the [Sub Menu] item.
The functions of the CFM Submenu are shown in the menu area
as well as in the status area.
Note:
Changes are only possible in write mode !
Changes in the Display Mode, Scale, CFM Map and Baseline are also
possible in read mode.
The following functions are available: Display Modes
(chapter 8.3.1)
Scale
(chapter 8.3.2)
Line Filter
(chapter 8.3.3)
Gently Color
(chapter 8.3.4)
Artifact Suppression
(chapter 8.3.5)
Baseline
(chapter 8.3.6)
Ensemble
(chapter 8.3.7)
Line Density
(chapter 8.3.8)
CFM Map
(chapter 8.3.9)
Balance
(chapter 8.3.10)
Dynamic Set
(chapter 8.3.11)
Smoothing
(chapter 8.3.12)
Voluson® 730Pro - Basic User Manual
8-8 105831 Rev. 0