Volume Mode
11.4.1.3 3D Pictogram Mode
Condition: A 3D-image being useful for a pictogram has to be displayed on screen, otherwise
adjust a useful 3D image before.
The [Accept ROI] item - in the “Static 3D” menu - and the
[Quad] screen format key are selected.
In this mode the rendered 3D image is used as a pictogram for the adjustment of the 2D sectional
planes A, B and C. A green line inserted on the 3D image marks the position of image B or C in
relation to the rendered 3D image.
3D Full-size Display:
[Single] screen format key illuminated.
The rendered 3D image is magnified and displayed in a full-size format without the
sectional planes A, B, and C.
To change the view of the rendered 3D image
Rotation about X-axis
Rotation about Y-axis
Rotation about Z-axis
Voluson
®
730Pro - Basic User Manual
105831 Rev. 0 11-35
To Next Page
Loading...
