Printing / Recording / Saving / Sending
16.3.1 Saving 2D Images
Operation:
1. Press this key to save the 2D images.
The menu area displays the “Save 2D” menu.
2. Select the [Screen] item.
Note:
The “DICOM Options” block is only visible if the save destination
“DICOM Server” is selected in the System Setup.
3. Select the desired “Save/Send” destination among:
Saving to Sonoview
Sending to an external DICOM server.
Saving to Sonoview as well as sending to an external DICOM server.
4. Press the right or left trackball key [Set] to save the scanned image.
During the save process the message “Saving in progress” will be displayed on the screen!
Note:
Pressing this key twice causes saving to the selected Save Destination.
To select save destination, review System Setup: Peripherals
(chapter 17.3.3)
Save with Comment
review: (chapter 16.3.6)
For restoring of saved images review: Sonoview
(chapter 15)
Voluson
®
730Pro - Basic User Manual
105831 Rev. 0 16-7
To Next Page
Loading...
