GE Voluson 730Pro - To Edit a Patient Report

Calculations and Patient Reports
Select the [DICOM Config.] button to display the DICOM Configuration window.
For details review System Setup: To specify a DICOM Address
(chapter 17.3.8.1)
Select this button to display the DICOM Transfer Queue Status.
14.2.3 To edit a Patient Report
Any stored measurements in a patient report can be edited.
Click the [Edit] button to edit results on the report screen.
The edit screen appears as follows:
Move the cursor to the desired field and press the right or left trackball key [Set].
Using keyboard type in changes.
After you complete editing, click [OK] on the screen to return to the report function.
The edited values are marked with [ ] on the report.
Voluson
®
730Pro - Basic User Manual
105831 Rev. 0 14-7