GE Voluson 730Pro - Entering Patient Data

Starting the System
4.5.2 To Freeze an Image
Freeze/Run key (hard key)
Storing of the image by pressing the [Freeze] key:
Bright key:
read mode (image is stored, probe deactivated)
Dark key:
write mode (real time is on, probe activated)
4.6 Entering Patient Data
Patient Data is to be entered by using a patient data form. This information will be used in
calculations, patient reports, DICOM settings and is displayed on the screen to identify images.
All entries into the data fields are stored on the internal database.
Note:
* If the unit is connected to a worklist server (e.g. HIS / RIS) you can select a patient from the
list. Operation review: To Retrieve Patient Data via External Worklist Server
(chapter 4.6.3)
* Otherwise use the keyboard to type in the Patient Information.
Operation review: Standard Input
(chapter 4.6.2)
Patient key (hard key)
− the Patient ID Menu appears in the menu area (chapter 4.6.1) if an exam is started
− the “Patient Information” screen appears on the monitor if no exam is started
4.6.1 Patient ID Menu
Patient ID Menu display
Voluson
®
730Pro - Basic User Manual
4-6 105831 Rev. 0