GE Voluson 730Pro - GYN Calculations in the 2 D Mode

Calculations and Patient Reports
14.5.4.1 GYN Calculations in the 2D Mode
To measure the Uterus, the Ovaries, the Kidneys and the Follicles in the 2D Mode:
1. Press the [Calc] key on the control panel.
The GYN Calculation menu appears in the menu area.
2. Select the desired “Measure Group”. For example, select [Uterus].
3. Select the desired item.
For example, select [Length].
4. Perform the measurement using the trackball and the right or left
trackball key.
Each item can be calculated up to four times.
For details refer to 2D Distance Measurement
(chapter 12.1.1)
Voluson
®
730Pro - Basic User Manual
105831 Rev. 0 14-21