GE Voluson 730Pro - After the 3 D Sectional Planes Acquisition

Volume Mode
11.2.2 After the 3D Sectional Planes Acquisition
After the 3D Sectional Planes acquisition, the system switches automatically to the “3D/4D Main”
menu.
The selected format will be present on the monitor (e.g., A,B,C - Sectional Plane Mode).
Note:
If you want to return to the “3D Pre” menu” press the right
trackball key (Vol pre displayed in the status area of the trackball).
Four different Modes enable the display of sectional planes:
• A,B,C – Sectional Plane Mode
(chapter 11.2.6.2)
• Reference Image Mode
(chapter 11.2.6.3)
• Niche Display Mode
(chapter 11.2.6.4)
• VOCAL
(chapter 11.6)
Voluson
®
730Pro - Basic User Manual
105831 Rev. 0 11-15