Volume Mode
11.2.6 Translations
The translation allow a displacement of the center of rotation along the intersection lines of the
sectional planes A, B and C.
The displacement of the center of rotation leads to the display of parallel sectional images.
To perform parallel slicing of images rotate the [Parallel shift] rotary control.
Clockwise turn of the [Parallel shift] rotary control :
Reference image: A
The sectional plane migrates from the front to the rear through the volume body.
Reference image: B
The sectional plane migrates from the left to the right through the volume body.
Reference image: C
The sectional plane migrates from the top to the bottom through the volume body.
Voluson
®
730Pro - Basic User Manual
11-22 105831 Rev. 0
To Next Page
Loading...
