Volume Mode
11.6.3 VOCAL - Static 3D
In the VOCAL - Static 3D menu several display modes can be selected.
You will enter this menu after accepting the ROI.
Select the [Accept ROI] item in the VOCAL Edit Contour menu.
The defined (shell) contour is accepted and stored.
The following menu appears on the monitor’s menu area.
To choose the Reference Image
The rotary knobs and the trackball are assigned to the selected reference image
for adjusting the position, magnification and rotation of the shell image.
To rotate and shift the reference- and VOCAL 3D image
Use the digipots to rotate about the X-, Y-
and Z-axis.
Use the [Par. shift] digipot to shift along
the Z-axis.
Voluson
®
730Pro - Basic User Manual
11-74 105831 Rev. 0
To Next Page
Loading...
