System Setup
17.3.3 Peripherals
VCR Source
Changing of the VCR source between VHS and S-VHS. Only one selection is possible.
RGB H/V Sync
To change between composite sync and separate horizontal and vertical synchronization.
Only one selection is possible.
Foot Switch left/right
Selection of the appropriate function. For each Foot Switch half only one selection is possible.
Save Destination
Changing of the save destination between Sonoview and DICOM server.
Only one selection is possible.
2D Save Key
Dedicate the function of the 2D Save key. Only one selection is possible.
Remote Print A
Select the desired Printer for the remote control [Print A] key from the drop-down menu.
Only one selection is possible. The selected printer is used for printing images currently displayed on
the monitor.
Remote Print B
Select the desired Printer for the remote control [Print B] key from the drop-down menu.
Only one selection is possible. The selected printer is used for printing images currently displayed on
the monitor.
Report Printer
Select the desired Report Printer from the drop-down menu. Only one selection is possible.
The selected printer is used for printing reports and images from Sonoview.
Voluson
®
730Pro - Basic User Manual
17-12 105831 Rev. 0
To Next Page
Loading...
