GE Voluson 730Pro - After the 3 D Rendering Acquisition; ROI Mode

Volume Mode
11.4.1 After the 3D Rendering Acquisition
After the 3D acquisition, the system switches automatically to the “Static 3D” menu.
The selected format will be present on the monitor (e.g.: 3D ROI Mode).
Note:
If you want to return to the “3D Pre” menu press the right
trackball key (Volpre displayed in the status area of the trackball).
Four different modes are possible:
• A,B,C - Sectional Plane Mode
(chapter 11.2.6.2)
• Reference Image Mode
(chapter 11.2.6.3)
• Niche Display Mode
(chapter 11.2.6.4)
• VOCAL
(chapter 11.6)
11.4.1.1 3D ROI Mode
This is the mode for the adjustment of the volume render box.
The volume rendering box determines the ROI for the 3D calculation which is inserted in the
orthogonal planes A, B, C. The rendering result is displayed in the lower right quadrant.
The [Edit ROI] item - in the “Static 3D” menu - and the
[Quad] screen format key are selected.
Voluson
®
730Pro - Basic User Manual
105831 Rev. 0 11-33