Spectral Doppler Mode
7.1.1 PW Main Menu
PW
Mode key (hard key)
Press the [PW] control to activate the PW mode in the preparation mode.
First only the PW-cursor appears on the active 2D image.
To start and use the PW mode review: PW Operation
(chapter 7.1.2)
To adjust the PW settings review: PW Sub Menu
(chapter 7.1.3)
This hard key is also the Gain control for the PW mode in write mode.
review: PW Gain Control
(chapter 7.1.2.3)
The “PW Main” menu appears on the screen (write mode).
Remarks:
* Changing the Speed, Gate width, Loudspeaker Volume, Wall Motion Filter and PRF is not
possible in read mode.
* The Steering function is only possible with linear probes.
Voluson
®
730Pro - Basic User Manual
105831 Rev. 0 7-3
To Next Page
Loading...
