2D Mode
5.19 2D Sub Menu
The Main 2D mode must be active.
Select the [Sub Menu] item.
The functions of the 2D Sub menu are shown in the menu area
as well as in the status area.
Note:
Changes are only possible in write mode (controls have no function in read mode).
The following functions are available: Quality
(chapter 5.19.1)
Line Filter
(chapter 5.19.2)
Enhance
(chapter 5.19.3)
Dynamic Control
(chapter 5.19.4)
Persistence Filter
(chapter 5.19.5)
Reject
chapter 5.19.6)
Gray Chroma Map
(chapter 12.1)
5.19.1 Quality
This function improves the resolution by reducing the frame rate.
Respectively it reduces the resolution by increasing the image frame rate.
There are three steps for Quality:
high: higher resolution / lower frame rate
norm: normal resolution /medium frame rate
low: lower resolution / higher frame rate
Remarks
: Changing the Quality is only possible in write mode.
Voluson
®
730Pro - Basic User Manual
105831 Rev. 0 5-19
To Next Page
Loading...
